November 20,
2005 Evan Daniel launched
an all PVC hybrid.
November 10,
2003 The Ceramic Nozzle for PVC Rockets page is up at:
http://www.intertlan.com/cohetes/nozzle/
this is the nozzle that will be used in future tests of the
PVC Hybrid Rocket Engine.
June 13, 2003
Third test
prototype PVC hybrid engine with improved performance over
previews tests.
April 18, 2003
- Second test of prototype PVC hybrid
engine that resulted in CATO
April 10, 2003
- Just put up a history page that is very interesting and
a must read if you are into hybrids:
Amateur
Hybrid Genesis by
Bob Fortune and Bill
Colburn
April 8, 2003
-The injector is one of the few parts that is not PVC and that is
reusable. It is a soft metal brass 1/4" compression fitting
as shown in illustration. Also known as the UC valve (The
Urbanski-Colburn Valve for Hybrid Motors).
Compression fitting
|
Introduction | Oxidizer
| Fuel | Tank |
Assembly | Test
Stand |
| Static Test | Results
| News | Post a Message
| Links | Spanish
|
|
Send
mail here
|
Contents
of these web pages are presented for informational and educational
purposes only. Author of this web site disclaims any liability
for the use readers make of the information presented herein
or for damage caused by hardware resulting from information
contained within these web pages. |
|
